Posts

The Manufacturing Trifecta

Just in case you don’t know the term, “hitting the Trifecta” is an expression used to describe the ultimate winning bet on a horse race. It refers to picking the top 3 finishers of the race, in the correct order. Since the odds against doing so are extremely low, the winning payouts are often extremely high. If you picked the right horses in the right order, a two-dollar bet could return a 4-digit payout.

Wouldn’t it be great to know which 3 horses to bet on, and in which order?

In many manufacturing companies in North America today, there are many competing ideas and priorities being considered by companies:

  • What is the most important improvement to make first?
  • What investment will yield the biggest return?
  • Which improvements will prove critical, and which ones will result in minimal, if any, gain?

There is an approach that your manufacturing company can follow to “hit the trifecta”. It’s a simple 3 step process. The first step is easy, and relatively low cost. The second step requires a bit more effort but is risk mitigated because it is based on the results delivered in step 1. The third step requires the most investment, but since it is based on the results delivered in the first 2 steps, it is not only risk mitigated, but the cost of the investment may have already been paid for by the results of the first 2 steps. Picking the order is just as important as picking the horses.

I want to show you how you can hit the trifecta in your plant.

Pulling off the Manufacturing Trifecta

Step 1 Icon that is a circleStep 1: Establish an empirical baseline to truly understand the critical “value-adding” activities on your plant floor. This is done simply by connecting your machines to FreePoint’s ShiftWorx system. It is remarkably inexpensive and can be typically be done in less than an hour without modifying the machine or your current infrastructure. Within 30 days of placing this small bet, you will not only have established an empirical baseline of your plant, but you will also have given real-time visibility to the plant that puts everyone on the same page, aiming for the same thing you are: productivity and profit improvement.

Step 2 Icon that is a circleStep 2: Engage your people in the process of improvement by using FreePoint’s Narrative software. You will now be collecting all the information you need to determine all the reasons your equipment and processes aren’t running as effectively as they should be. And more importantly than that, you will have made your people a part of the solution and improvement process, every hour of every day. They will be engaged. FreePoint’s Narrative software is embraced by workers when they conclude that management is not monitoring them, but rather listening to them. This is a powerful game-changer for many companies, especially those companies where people are their biggest input cost. Those same people can also be their biggest asset.

Step 3 Icon that is a circleStep 3: Connect your live, empirical machine data, and your fully engaged people, to your schedule and workflow plan dynamically – in real-time. Most plants use a combination of accounting systems, whiteboards, even excel spreadsheets, to plan and then report on the performance of their productivity. Some may have an ERP system deployed and some may even be considering an MES system. The problem with most ERP and MES system deployments is that it represents a single, very large bet, that will take a very long time to pay out if it pays out at all. FreePoint’s approach is to use what was gained (knowledge, insight, plus early financial payback) from the first 2 stages, tying them together in a process using visualization tools that line up with your plant’s current effective processes. Placing a bet on a system that takes years to fully implement and requires your manufacturing processes to be modified for the system to work is not just a bad bet, it’s often a losing bet.

The Outcome

factory clip art freepoint technologiesIf you are still reading, you are probably wondering how long it should take to hit this trifecta. The first step should take 30 days and should result in a payback 30 days later. The second step should take 30 days, and it too should result in a payback in 30 days. The third step should take about 120 days, but it can take as long as you like, because at that point, you will already have great empirical data, engaged and motivated people, and your system can be built to match your improved, and continually improving, manufacturing processes.

What is the expected payback on hitting this trifecta? From our experience, our customers typically see a 10% to 15% improvement at step 1, a further 10% to 15% improvement after step 2, and a 20% to 30% improvement after step 3. Doing the math, that would work out to productivity improvement, or capacity increase, of between 45% and 79%.

There it is, now you have the knowledge on which horses to bet on! Our suggestion: bet on achieving empirical data first, engaging your people second, and digitizing your plan third.

Call FreePoint to get started today.

FreePoint Technologies CEO Paul Hogendoorn

FreePoint Expands Into Soft Goods With TexTempo Partnership

TexTempo brings deep experience in textile and related industries to FreePoint ShiftWorx platform

LONDON, Ont. and ATLANTA, Jan. 30, 2019FreePoint Technologies, an award-winning provider of software for the Industrial Internet of Things (IIoT) to manufacturers worldwide, today announced that it has entered into a strategic relationship with TexTempo, a leading provider of software for labor efficiency tracking in the soft goods industries. Through this partnership, TexTempo will bring new capabilities for machine monitoring, downtime tracking, and operating efficiency to its existing portfolio of labor efficiency and payroll processing products.

Read more

FreePoint Doubles Down On Industrial IoT Growth In Manufacturing

Company announces acquisition of CoreSolutions to address demand from customers worldwide

LONDON, Ont., Jan. 9, 2019FreePoint Technologies, an award-winning provider of software for the Industrial Internet of Things (IIoT) to manufacturers worldwide, today announced that it has acquired CoreSolutions, a software development company with offices in London, Ontario and Toronto. Through the acquisition, FreePoint will accelerate the development of its industry-leading ShiftWorx platform for machine monitoring in manufacturing while providing enhanced flexibility for configuration and customization to meet enterprise customer needs.

Read more

In The News: FreePoint At NRCC Innovation Hub

On November 30th the National Research Council, opened its doors to introduce the new $5-million Manufacturing and Automotive Innovation Hub. FreePoint was onsite demonstrating our machine monitoring capabilities and discussing the impact of this emerging technology on local manufacturers.